Reverb Effect (pt3) – Designing the space and parameter of Time

When using any tool, you do have clear idea about what you use.

You must understand that. If you want to become more professional.

By a simple thing: from understanding to effective use so that is still a long way. So what happens if you do not understand the things you are taking?

I could not think anymore.

To Become an wise composer who got a mix of clean and easonably deep space is your Rights. Full control critical engine is your homework.

If you want your RIGHTS, let’s do it hard.

Oldest Review – What is Reverb?

We see Reverb (short for reverberation) everywhere. From bathrooms, living room, dining room to theaters, caves. Reverb place also, more or less. Unless one single room in the world is designed to eliminate the reflected sound is almost absolute. Believe me, you will not want (and do not dare) into that room where!

Reverb is all natural reflex sound produced when sound waves strike the sound reflecting surface (eg cliff in a cave) and is reflected.

Do you want to see with the naked eye Reverb?

It’s easy, you just grab a flashlight shines on a mirror in a dark room. Observe the way the light hit the mirror, recoil, hit to the wall or floor (depending on the angle you phototherapy). S it!

Design Space

Reverb helps us feel the space around. So Reverb sound design can be considered a space designed for a mix or instrument.

In the digital world, you can recreate on a computer any space, whether in imagination only with the mouse, keyboard, 1 and 1 little bit patient knowledge (trustworthy).

Like smartphones, a space any of which can be set up through specific parameters.

With smartphones, namely: speed, memory, colors, shapes …

With space, namely shapes, volume, measure the sides, ceiling materials, flooring materials, wall materials, type / quantity / layout objects inside …

These parameters affect the Reverb was created in that space like? Great number of. Sounds reflected long or short, in or opaque, light or dark, thick or thin, more or less echo, echo heard immediately or not …

By recreate as closely as possible with features Reverb on, we can simulate the feeling of space of the listener. So there is we have designed the space and not the design Reverb anymore right?

Parameters Time

When the sound source starts playing, Reverb is created right at first sound waves touch the reflective surface closest sound. However, it does not maintain forever that energy will weaken only to lose in a certain time period.

ẻugfnb

Therefore, when you shout in a cave, the echoes will fade and disappear completely after 1-2 seconds. The time parameters help us understand the reverb in that brief time?

Decay (alternatively known Reverb Time)

Decay is tell us how long the Reverb will disappear (usually measured in seconds). This is one of the most important parameters of the Reverb because it most easily recognizable by ear. Therefore, if the setting is not careful, it will be easy to make opaque mix.

Decay (or Reverb Time / Reverb Tail) called the T60 international for a period refers to the volume of the Reverb reduce 60dB. dB is measured to small units (intensity) of sound, analog measurement unit cm lengths.

Note the MIX: Decay not tell you the size of the room because it is affected by many other factors. You want to look, getting in one empty room, you hear the echoes alone much longer than the time display of all the furniture in it.

In addition, the main Decay factors that distinguish the most obvious one device / Reverb plug-good and bad. As with the device / Reverb plugin is not good, Decay larger, the Reverb generate as unnatural, even more ragged and ripple hear.

Early Reflections (original sound reflex / reaction just started)

All the sound reflected from the wall first (or surface) close with most audio sources grouped into Early Reflections (the first objection). Thus, it helps you visualize the magnitude of the space.

When standing in a room, the first objection appears almost instantaneously (sound speed of 300m / s) and faster than when I stood between a large dynamic.

Basically, the reverberation includes 2 stages: Early Reflections and Reverb True (Reverb actually). The sound reflections typically generate Early Reflections 1 single dam on the reflective surface and then return. Therefore, it is less distorted and more similar to the original sound. Early Reflections to your ear after a few to several tens of milliseconds to then quickly replaced by True Reverb (Reverb actually). Reverb is the first real “big clock” sound reflects the many times with many surfaces and “tired” reflected back position source. Reverb sound quality is often very different from the original negative so distorted, weakened, noise during ongoing reflection, especially as long Decay.

Predelay (latency of Reverb)

Despite the huge movement speed (300m / s), the sound will still need a little time period to touch the nearest reflecting surface (eg wall, cliff) to create the Early Reflections. Around this time, called Predelay, corresponding to the distance from the sound source to a reflective surface such.

So when Reverb mix, we can use to push Predelay audio source (eg vocals) further setbacks rear speakers or pulling them toward the listener.

My Tip:

When mixing vocal or solo instrument in the ballad, you just use the Pre-Delay wise to push them deeper in the mix without taking much Reverb, easy to damage the mix.
Unless you want to design the space surreal, Pre-Delay should establish safety in approximately 20ms – 200ms (ms = milliseconds = 1/1000 second)
The example below illustrates the change of Predelay from 10ms (first half) to 108ms (second half):

Damping / Frequency Absorbtion – sound absorbance

In sound, the sound waves at high frequency (listen above) have lower energy sound waves at low frequencies (bass hear more).

Acoustic bass, midrange, high sound. People use the frequency (Hz) to high sound level scale (the 1 again: similar cm in length scales). The low frequency bass instance, high frequency sound express high.

In the majority of cases, each different frequencies absorbed (weakening) in 1 different levels. This occurs due to the characteristics of the material surface sound reflections. Usually the high frequencies are absorbed more easily by the objects placed in the room. Carpets, curtains, furniture, blankets, clothes … are capable of absorbing part of the sound wave power.

Therefore, when you are in a whole room around the curtains, floor carpets, the high frequencies will be absorbed more powerful, destructive power and disappear faster than low frequencies. So, you can feel his voice, the space around the pumpkin and dry.

With Reverb, parameter Damping (with a recording device is Absorbtion) to help you adjust the high frequencies are absorbed more or less. Consequently Reverb create secret or open, warm or cold.

Some devices / Reverb plugin (eg ArtsAcoustic Reverb) also allows you to adjust the low frequency absorption medium with different rates. Its working mechanism similar to 1 Super Equalizer (EQ), the impact on different frequencies with different levels over time.

Be the first to comment

Leave a Reply

Your email address will not be published.


*